Home Projects

Hornsdale Wind Farm Stages 1, 2 and 3

See all Projects
Project Details

Location: Hornsdale, SA

PROJECT SUMMARY

The Hornsdale Wind Farm is located at Hornsdale, approximately 30km north of Jamestown in South Australia. When completed, it will consist of 99 wind turbines with a generation capacity of 315 megawatts.

Our scope of works across all three stages was to design, construct and commission the substations and connection to the grid including reactive plant support.

Stage 1
involved the construction of 32 Siemens 3.2MW turbines, 55km of HV cable between turbines. One substation which included a 120MVA transformer, auxiliary transformer, control room, two reactive bays and a 275kV protection and switching bay.Stage 2
involved the construction of 32 Siemens 3.2MW turbines, 50km of HV cable between turbines. One substation which included a 120MVA transformer, auxiliary transformer, control room, two reactive plant bays and a 275kV protection and switching bay.

Stage 3
involved the construction of 35 Siemens 3.2MW turbines, 55km of HV cable between turbines. One substation which included a 150MVA transformer, auxiliary transformer, control room, two reactive plant bays and a 275kV protection and switching bay. A total of 99 Siemens turbines providing a total output of around 315MW.

Related Projects

Musselroe Wind Farm

The Musselroe Wind Farm is located at Cape Portland Bay, 30km north east of Gladstone, Tasmania.  Musselroe wind farm was a particularly challenging project due...

View Project
Bald Hills Wind Farm

The Bald Hills Wind Farm is located approximately 10km south east of Tarwin Lower in South Gippsland, Victoria on a site of approximately 1750ha of...

View Project
Hornsdale Wind Farm Battery Energy Storage System

The 100MW Hornsdale Battery Energy Storage System will be the world’s largest lithium ion battery installation.

View Project
Copyright © 2021 © 2021 Consolidated Power Projects Australia Pty Ltd
Back to Top